Thursday, February 07, 2013

Lever Gun Self-Defense

Our friend Ron Larimer over at When the Balloon Goes Up has a great article on using lever action rifles for self-defense, an issue that is becoming bigger and bigger as states go to a less permissive firearms environment:
...if you want a rim-fire or a race gun, the ‘66 and the ’73 would be great choices. If you want a plinker, a hunting gun or a home defense gun the later models with the locking blocks should be stronger and more reliable. The only real definites are if you want a scoped rifle, buy a Marlin and if you want a light rifle buy a Winchester 1892 Carbine clone.
Ron also says he would almost sell his AR for a Cimarron Texas Brush Popper 1873 clone!

You know we've covered the subject at length on SHOOTING GALLERY, the late, lamented COWBOYS, DRTV, the podcast, heck, even the blog. The reason is that lever action rifles are incredibly efficient as self-defense tools:

• The carbines are fast-handling
• They are super easy to operate (monkey run lever good)
• They tend to be very reliable
• They (at least some models) are easy to reload not he fly
• They come in a variety of excellent self-defense cartridges
• Rightly or wrongly, they tend to be seen as less-threatening firearms
• They are inexpensive, especially in a world of $2K ARs

I have argued on the air (this season, in fact) that lever guns were state-of-the-art military weapons in their time (just ask General Custer about the Indians' Civil War surplus Henry rifles). Lever guns have always been well thought of in the self-defense community. Ed Head talked about seeing lever guns in the GUNSITE rifles classes, and without exception the guns were impressive workhorses. Gabe Suarez has written extensively on lever action rifles as self-defense tools...here's a long and interesting piece from one of his instructors.

As a veteran cowboy action shooter, I have a deep and abiding love of lever guns...and, yes Ron, I shoot a .357 Texas Brush Popper short-stroked by Ken Griner in competition! It is chain-saw fast. More than that, I am a huge fan of the lever action and have far too many of them and have shot many more.

Marlin 1894 Cowboy .44 Magnum

My personal self-defense rifle is an old Marlin 1894 in .44 Magnum. I'm planning on having some mods to the gun (from Steve Young at Steve's Gunz, who has done a lot of lever gun work for me...Steve is the great master of the Winchester 1892 and clones). My reasons for the Marlin are that it is totally reliable, accurate and a breeze to shoot with 240-gr JHP Black Hills. I'm planning on modding the gun just a little...XS Sights, single piece firing pin, Wild West Guns Marlin trigger and ejector...mostly what I would think of as clean-up work. My experience has been that most Marlins, Winchesters and 1892 Winchester clones will need some cleaning up.

I have also used a Winchester Trapper 16-inch '94 in .44 Magnum as the house rifle. Lemme give you a quick caveat here....the '94 action was designed for longer rifle cartridges and is generally temperamental with pistol-length cartridges. Mine feeds both .44 Magnum and .44 Specials so well that I used it as a training gun for newbies with super-soft Specials.

I think the standard that all lever guns are judged against is the pre-1964 Winchester '94 in 30-30...mine dates from about 1960...you've seen it on GUN STORIES. The 30-30 is a world class self-defense cartridge...hey, it's killed more whitetails than Godzilla. We've shot the Hornady 160-grain Lever Revolution rounds into jello, and they are very impressive! If I was left with only one lever gun and it was that pre-'64 30-30, I'd be okay with that.

Choosing a lever gun for self-defense, my own choices would be older Marlin 1894 in pistol calibers (the .357 1894 Marlin is a simply wonderful little gun) or Marlin 336s in 30-30, pre-'64 or current production Model 94 Winchester in 30-30, Browning '92 (made by Miroku in Japan) in .44 or .357, current production Winchester '92s in pistol caliber (also Miroku, I believe), Winchester '92 clones in pistol caliber (the Rossis are better rifles than they're ever given credit for...I have 2, a .44 Magnum and a .357, and they have been super rifles), then the 1873s. For self-defense purposes you need ammo that loads through a gate in the frame, as opposed to through the front of the tube (the Henry Big Boys, Marlin .32 H&R, the .22s).

I love the 1873s, but having put tens of thousands of rounds through them in competition I know all their weaknesses. I wouldn't want to put a lot of full-power self-defense loads through a '73 because of the fundamental weakness of the locking system...each iteration of the lever action got stronger and stronger. A Brush Popper will work great as a self-defense gun, but keep the +P to a minimum (or not at all). BTW, I have one of the new Winchester 1873s on order, but it'll be a few months before I can get my hands on it to test...it's in .357/.38.

My same advice on ammo would apply to, say, the Rossi '92 clone in .454 Casull...I wouldn't want to feed to feed it a steady diet of Corbon or Buffalo Bore hunting loads! Lever guns can be very picky about cartridge length...my Marlin .357 would only run with .38s until I had Steve Young tinker with it, and it still prefers shorter .357s. When you see ".357/.38" or ".44 Magnum/.44 Special," keep in mind that individual guns might not run with both the shorter and the longer cartridges. If your gun runs with both, cherish it! And remember, FLAT TOP BULLETS only! I've seen a lever gun mag tube explode because it was loaded with factory round-nose FMJs and the recoil jammed the bullet nose into the primer of the cartridge ahead of it. Nobody suffered any major injuries (the shooter's support hand was cut when the forearm split), but a fine custom Winchester ended up in lots of pieces.

XS Sight options for Marlins

Marlins with their closed top actions and angle-eject Winchesters can take optics, if that's important to you. Marlins can be fitted with a forward mount scout scope configuration, and some Rossis are available with a Scout mount from the factory. Most lever guns come with the traditional semi-buckhorn rear and bead front, which works just fine. For a self-defense gun, I might suggest taking a page from the cowboy shooters and "flat top" the rear sight, cut off the buckhorns, or go to a Marble flat top or sporting rear sight. You'll end up with more of a pistol-style sight picture and a clearer view for target-to-target transitions.

Marble Flat Top rear sights

LEARN TO OPERATE THE GUNS AT FULL SPEED! This means that if you decide to use a lever action rifles as a self-defense gun you'd be crazy not to take up Cowboy Action Shooting...get a straw hat, wear jeans, a chambray work shirt and some inexpensive Ariat boots, then learn how to really run a lever action rifle! We found this to be really important when running self-defense drills...cowboy shooters were already used to keeping the rifle shouldered when levering, not wrapping your strong hand thumb around the rifle stock before firing, just like with your AR keeping your support hand pretty far forward on the forearm to drive the rifle from target to target and figuring out where to keep spare ammo for quick reloading...a lever action requiring you to think in terms of "topping off" rather than reloading when the gun is empty...any break in the action gives you the opportunity to shove rounds into the gun.

One of the thing you will learn about lever action shooting if you go to competition is to NEVER BE GENTLE! It is easy to "short stroke" a lever gun and jam it up. The solution is to make sure you fully run the lever...run it like you mean it.

If you can. watch the "Duel in the Sun" episode of SHOOTING GALLERY, with cowboy shooters running against 3-Gunners...you can really get a feel for how lever guns should be run!

Good grief, I guess that's enough for one post! I haven't even gotten to the more exotic lever caliber...the 45-70, especially on a platform like the Marlin Guide Gun, is...emphatic. Easily controllable, but you do have to pay attention. Then there's the Henrys, the Yellow Boys (I have a totally cool new one made for .44 Russian), the 1876, 1886 and Colt Burgess clones, the .348 Model 71, the Big Horn .500 S&W rifles, Doug Turbull's magnificent lever conversions. There's a whole other conversation on Italian clones...Uberti vs. Pedersoli vs. Chiappa...sigh...

Rossi .357 10+1

If you want to wade in, the pool is deep. Let me throw out one quick suggestion...MSRP on a Rossi '92 clone (from Brazil) is less than $600, and you can find used ones for much less. If you need it slicked up, take it to Steve Young. Get a leather wrap for the lever — easier on your hand when you're trying to go fast — and shoot the heck out it.


Oh wait! I never even got to using .22 lever guns for training! Short story...get a Henry Golden Boy. That's what I use!

Henry Golden Boy .22


30 comments:

BBJohnnyT said...

Totally agree on the utility of a lever gun, especially in a caliber to match a revolver. I have various rifles and pistols, but my primary defensive world revolves around the .357. Decent power and fairly plentiful, even in today's panic market.

I'm still patiently waiting for my latest acquisition, a Rossi 92 .357 in bead blasted SS that I ordered from Steve Young about 14 months ago. He's that backlogged. Even with all of his trick customizations, it's still cheaper than Spike Wesson, my basic AR (M&P lower and Spikes upper).

With today's AR prices, I could by THREE stock Rossi 92s for the cost of one AR, and still have money left over for ammo.

Anonymous said...

Shameless plug alert! For any who want to find out more about Cowboy Action Shooting, go to my youtube channel at the following link and watch the 'Introduction to Cowboy Action Shooting' video. Lot of other vids on the channel as well including some of MB shooting!
https://www.youtube.com/user/GrizzlyDaveCowboy

- Grizz

Anonymous said...

Another feature that I like is having my lever-gun, a Marlin 1894 CS chambered in .44 Magnum, the same caliber as my 5 1/2" .44 Magnum Redhawk. Both handle the hottest factory loads and ammo management is simplified. Both make fine "wilderness guns".

Life Member

Frank Nelson said...

I use a Marlin 94 in .44 Mag/Sp for my house gun. It has been "fixed" by Jim Brockman in Idaho; 16 in barrel, cleaned up the action, etc... and IT RUNS. There's no way I feel under armed with one. I can single load 7 rds in ten seconds, something I practice. In the words of Clint Smith, "you don't want to be coming down the hall with that happening." As a family we own one (at least) copy of just about every gun mentioned By Michael. We'll be OK.

Anonymous said...

A few years back I inherited my dad's Marlin Glenfield 30 Special in .30-30, bought new Xmas of '86 and still NIB it came in - unfired - and haven't been able to bring myself to pull the trigger on it, though I'd like to.
Gonna take her out this spring and get acquainted and, with an addition or two, maybe give CAS a try.
I believe I owe the old girl - and dad - that much at least.

Any new guns purchased will, when my wife asks why, be blamed on Michael.

~ Gunny

Anonymous said...

And where can I get some info on the "flat top" rear sights and leather wraps for t he lever? In fact, can the lever loop be enlarged, 'cause I can barely get my fingers inside mine. Suggestions?

~ Gunny

Beaumont said...

Great post. Lever guns have been on my mind much lately. I nearly bought a 336, but .30-30 is suddenly hard to find. However,I have a ton of .38Sp & .357 is still showing up on store shelves, so I suppose it's a Rossi for me.

Rob Drummond said...

I have a Marlin 336 w/scope a Henry Golden boy 22 mag and a Marlin 1895CB in 45-70. The 1895CB loads 9 45-70, ever see what a 45-70 300grain hollow point do! I reload and can get mine close to 2000ft/sec..........big holes!
Rob Drummond
Hillsboro, NH

John R said...

I have my grandfather's Model 94 that was his primary self defense gun. From a cattle war in Montana to riding the range in California to following the wheat when he started his combining business, that '904 was always at his side.

John R said...

Don't know where the 0 came from. Fat fingers I guess.

Michael Bane said...

The Marble's flat top sights are available at Brownells. Kirkpatrick Leather has a nice buffalo leather wrap:

http://www.kirkpatrickleather.com/accessories/buffalo-lever-wraps-66

mb

Anonymous said...

Ihave a Marlin 336 in 30-30 that'spart of the home dfense arsena. I only have two complaints. One, it didn't come with a high capacity assault clip magazine doohickey. And two, Nothing in the instructions tells me where to pt my flashlight, niper scope, red dot sight, bayonet, coffee maker, jacuzzi, Wii controller, etc. I'm seriously bummed.

Darrell said...

I have a 20" Rossi Puma .357, bought for a paltry sum some years ago. Great gun, especially for the money. I've thought of using it for HD, hard to argue with 10 rds of .357, or 11 of .38. I usually run cheap vanilla hollowpoint .38s in it, it's a frickin' laser.

Overload in Colorado said...

Wild West's Co-Pilot. All the greatness of a lever action, and breakdown so it travels well. A bit pricy.
Does anyone else make a breakdown lever action?

Publicola said...

Mr. Bane, don't ever let anyone accuse you of not being timely lol Colorado's HB 1224 was just submitted today. It's a magazine ban that covers magazines - not just those for semi's. It hits any magazine, (and arguably even cylinders) but it does exempt tube fed .22's and lever action firearms.

(shameless plug - I have a post at my place with all the nasty details of this proposal)

So if this piece of flotsam masquerading as legislation passes, I expect a lot of folks might start buying lever actions around here. If only someone would make one in 10mm... ;)

But that was a nice write up you did. I hope you find the time to carry on like that more often.

Michael Bane said...

Overload,mfor a while Winchester made a pricey '92 breakdown, but I don't think it's cataloged anymore. Chiappa makes several breakdown '92s, but the aren't giving those away, either.

http://www.chiappafirearms.com/product/821

I think Taylor's may have some of the Chiappas. Chiappa did a prototype run of 16-inch barreled breakdowns, but they never made production.

You can do a poor man's breakdown by taking a '92 or '94 and removing the stock, which is 'way easy.

mb

Bubblehead Les. said...

Late to the Show, I know, but here's a true story for you all to share. My nephew who is a Navy EOD Tech, is being deployed to Afghanistan for a year. When his Tour is up, he's being shipped back to Southern California. Since he would be in Violation of SoCal Law if he took his ARs and H+K Pistols back there from his Mom's Place here in Ohio, he's decided to go with a .357 Lever Gun and Revolvers for his Home Defense needs next year.

What's Ironic is the Fact that for a Year, he'll be ORDERED to carry a Full-Auto M4 Carbine with LOTS of "High Capacity Magazine Clips", yet he can go to Jail if he brings a Semi-Auto M4 Clone across the Cali State Line, just because it doesn't have the "Button."

jeremy said...

It's a beauty. Just like my new one.

beretta guide rod

Anonymous said...

I find it amusing that the same guys who are dismissive of lever rifles and revolvers are often the ones who are very enthusiastic over things like crossbows.

Unknown said...

I like this article, I see a lot of people visit it. I think it is a quality article and interesting. Thank you for sharing baixar facebook gratis , facebook baixar , baixar whatsapp gratis , whatsapp baixar , facebook descargar , descargar facebook gratis , descargar whatsapp gratis , descargar whatsapp gratis , baixar mobogenie gratis , baixar mobogenie gratis , mobogenie market

Unknown said...

Latest Govt Job Notification 2016

IBPS Specialist Officer Recruitment Notification 2015-16

Very interesting thanks. I believe there's even more that could be on there! Keep it up.....

Unknown said...

Latest Govt Bank Jobs Recruitment Notification 2016

Very well written information. It will be beneficial to anyone who utilizes it, Keep up the good work ...........

Unknown said...

Nice one.People who are having safety and security related questions may take help from these guns and training too as these guns can also be used when your and the people around you don't feel safe and the security is breached, but you must remember one thing that proper licensing should be used.
Regards:
MA Gun License

al3ab banat01 said...

تشكيلة من افضل الالعاب الاونلاين الرائعة
العاب تلبيس
al3ab-banat01

Xenons4U said...

This is a nice post in an interesting line of content. Thanks for sharing this article, great way of bring such topic to discussion.



5.56 Brass

hamza said...

nice post thanks for sharing,


color

Jacob Anthony said...

I don't see any reason why does reload should take more than 20 seconds with this gun.
223 Bullets for Sale

michaeljoshua said...

Very interesting! This work is really satisfactory for us. Thanks
Once Fired 223 Brass

Anonymous said...

تقدم ماسترتك افضل اسعار ماكينات تعبئة سكر الفنادق مصنعه بالكامل من الفولاذ المتين والاستانلس ستيل المقاوم للصداء
حيث يتم صناعة المكينه بجودة ودقة تحت اشراف نخبة من خبراء صناعة مكن التعبئة والتغليف، مع ضمان صيانة دورية من شركة ماسترتك

Anonymous said...

ادلوالي هي من اكثر الامراض التي يصاب بيها كبار السن وخاصةً من النساء ولهذا فيقوم الدكتور محمود ناصر ب علاج دوالي الساقين بدون جرحة حيث يستعمل احدث التقنيات العلاجيه مثل حقن الدوالي او الليزر او تقنية الكلاكس الجديدة فيقوم الدكتور محمود ناصر بتحديد تقنية العلاج علي حسب الحالة ودرجة الدوالي.